Here you have the opportunity to configure individual orthopedic shoe lasts and order directly afterwards. Please enter a project title in the first step and select which foot side you would like to start with.
If you already have finished 3D files of your lasts, you can upload them at the bottom of the page and jump directly to the ordering step.
Do you want to configure the left or the right foot first?
Data upload and insole outline
In this step, you upload your foot scans to define the last size and insole outline based on them. You have the option to use 2D or 3D scans of the feet. If you want to move the scan, simply hold down the right mouse button and place it as centrally as possible under the last model. Please note that the configuration steps must be gone through for both feet.
Upload foot scan (2D or 3D)
Please upload your two foot scans
Detail customization toolbox
Here you will find the toolbox to customize the bars exactly to your needs. To do this, simply select the desired setting and move the points in the viewport. The bar perspective can be changed with the left mouse button, and with the right mouse button you can move the bar in the workspace.
Toe and Heel Burst
Ankle axis positioning
Define leg axis
Calcaneal Angle
Forefoot twisting
Bale, instep and heel measurement
In this step, you have the option of adapting the shape of your last even more precisely to your customer's foot. To do this, first place the measurement lines for the ball, instep and heel measurements. You can now thicken or thin these points using the sliders. In expert mode, you also have the option of adjusting the foot shape in the cross sections.
1. Place measurement lines
2. Set dimensions
Bale dimension
Clamping dimension
Heel dimension
In this step you have the option to add leg extensions and pads. To adjust the position of the pads exactly to the real foot, your scan will help. Adjustments must be made separately for each foot and are optional.
Add/Extend leg
Circumference at height
0 mm:?
Circumference at height
0 mm:?
Circumference at height
0 mm:?
Circumference at height
0 mm:?
Circumference at height
0 mm:?
Circumference at height
0 mm:?
Define leg axis
Pad
Scaling
Finalize configuration
Select last pitch
Heel cut2-piece
3-partStep cut
Last configuration completed
Your last configuration is complete! Now use the store function at the bottom of the page to place your order.
Buy pair of shoe lasts (3D printing)
Urgency
Economy
Standard
Express
Unit Price:
--,--
Configuration Total Price :
--,--
Buy STL-Files
Unit Price:
--,--
Configuration Total Price :
--,--
Hide Grid
Show Gizmo
Lasts Transparent
3D Scan transparent
Hide 3D Scan
Select Range
View
Bale dimension:
Clamping dimension
Length:
0 mm
Width:
0 mm
Height:
0 mm
Height:
0 mm
Bale Size:
0 mm
Tension Dimension:
0 mm
Heel Measurement:
0 mm
Ankle measurement:
0 mm
Heel Drop:
0 mm
Toe Drop:
0 mm
Select scaling
Please select the format to which your scans will be oriented.
A4A3
One moment...
Data being uploaded
The configuration was successfully added to shopping cart!
How would you like to proceed?
One Moment - The configuration is added to the basket...
Do you have any suggestions or requests regarding the last configurator?
Please send us your suggestions for improvement at mohms@protiq.com
Do you have any questions?
We will be happy to advise you personally regarding your 3D project.